Powersmart PS76138A, Инструкция по эксплуатации

Страница: 13 / 21

13
Dust/Chip Extraction
Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be
harmful to one’s health. Touching or breathing in the dusts can cause allergic reactions and/or lead to
respiratory infections of the user or bystanders, certain dusts, such as oak or beech dust, are considered as
carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative).
Materials containing asbestos may only be worked by specialists.

To achieve a high level of dust extraction, use a suitable dust
extractor together with this power tool.

Provide for good ventilation of the working place.

It is recommended to wear a P2 filter-class respirator.
CONNECTING AND REMOVING BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the power tool for the first time, place
the battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the
instructions in the battery charger section.
To install the battery pack
To install the battery pack into the bottom of the handle, align the rails of the battery pack with the rails in
the handle and push the battery into the handle. To connect the battery, slide the battery pack fully
forward. Until the latch locks into place.
To remove the battery pack
Press the battery release button ,Slide the battery pack backward, and then pull or lift the battery out of
the tool .
WARNING:
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or
fire:
• Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
• Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on
any part of the power tool.
• Read, understand, and follow the instructions.
Fig.3