Powersmart PS76138A, Инструкция по эксплуатации

Страница: 12 / 21

12
ASSEMBLY INSTRUCTION
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly assembled
could result in serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
MOUNTING / REPLACING THE SAW BLADE
WARNING: Before any work on the power tool, remove the battery.

When mounting the saw blade, wear protective gloves. Danger of injury when touching the saw
blade.

Only use saw blade that correspond with the characteristic data given in the operating instructions.

Do not under any circumstances use grinding discs as the cutting tool.
Removal of the Saw Blade
For changing the cutting tool, it is best to place the machine on the face side of the motor housing.

Press the spindle button and keep it pressed.

The spindle lock button may be actuated only when the saw
spindle is at a standstill. Otherwise, the power tool can
be damaged.

With the Allen key, unscrew the clamping bolt turning in
rotation direction.

Tilt back the retracting blade guard and hold firmly.

Remove the clamping flange and the saw blade from the
saw spindle.
Fig.2