PowerShield PSCM1100, Руководство пользователя

Страница: 16 / 21

www.powershield.com.au 15
Fault mode When a fault has occurred, the ERROR
icon and the fault code will be displayed.
3-7. Faults Reference Code
Fault event
Fault code Icon Fault event Fault code Icon
Bus start fail 01 x Inverter output short 14 x
Bus over 02 x Battery voltage too
high
27 x
Bus under 03 x Battery voltage too
low 28 x
Inverter soft start
fail
11 x Over temperature 41 x
Inverter voltage
high 12 x Over load 43
Inverter voltage
Low 13 x Charger failure 45 x
3-8. Warning Indicator
Warning Icon (flashing) Alarm
Low Battery Rapid one beep every second
Overload 2 short beeps every 2 seconds
Battery is not connected 2 short beeps every 2 seconds
Overcharge Continuously sounding
Site wiring fault 2 short beeps every 2 seconds
EPO enable 2 short beeps every 2 seconds
Over temperature Continuously sounding
Charger failure Continuously sounding
Battery Fault
Continuously sounding
(At this time, UPS is off to
remind users of something
wrong with battery)
Replace Battery
2 short beeps every 2 seconds
EEPROM error 2 short beeps every 2 seconds