PowerShield Centurion PSCE1000, Руководство пользователя

Страница: 8 / 24

www.powershield.com.au 7
2-2. Setup the UPS
Step 1: UPS input connection
Plug the UPS input cord into a two-pole, three-wire, grounded receptacle only. Avoid using
extension cords.

Centurion series come with Australian power cord in the package.
For 1000/2000VA : 10A Australian input plug to IEC socket
For 3000VA : 15A Australian input plug to IEC socket
Step 2: UPS output connection

There are two kinds of outlets on this model: programmable outlets ( Marked in
White colour ) and general outlets( Marked in black colour ) . Please connect
non-critical devices to the programmable outlets and critical devices to the
general outlets . During power failure, you may extend the backup time to critical
devices by setting shorter backup time for non-critical devices.
Step 3: External Battery Bank connection

There are external battery banks available on each models for gaining more battery
backup time. Please check following instruction for connecting external battery bank
to the unit.

Please provide enough space between UPS and external battery bank for ventilation.
Also, do not stack battery banks. Stacking results in a tipping hazard.