7
If the Fridge/Freezer is not level, the door and magnetic seal
alignment will be affected and may cause you Fridge/Freezer to
work incorrectly. Once the Fridge/Freezer is placed in its final
location, adjust the levelling feet at the front by turning them.
Before you insert the plug into the wall socket make sure that the voltage and
The frequency shown in the rating plate inside the appliance corresponds to
Your electricity supply. We recommend that this appliance is connected to the
mains supply via a suitable switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance become damaged or should it need
Replacing at any time, it must be replaced by a special purpose made mains
Lead which can only be obtained from Shomar Ltd.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted plug is not suitable for your socket, then the plug should be
removed and an appropriate plug fitted. Destroy the old plug which is cut off
as a plug with bared cord could cause a shock hazard if inserted into a socket.
The plug on this appliance incorporates a 13 Amp fuse. Should the fuse need
to be changed a fuse of the same rating must be used. Ensure that the fuse
cover is refitted.
1.
Install the refrigerator on a flat surface in order to prevent vibration
and noise.
2.
The cord should be secured behind the appliance to avoid injury
3.
Choose a dry well-ventilated place
Electrical Requirements
Installation Instructions
You created this PDF from an application that is not licensed to print to novaPDF printer (