PowerPoint P65555FFM2GLB, Инструкция по эксплуатации

Страница: 6 / 22

6
Before you insert the plug into the wall socket make sure that the voltage and
The frequency shown in the rating plate inside the appliance corresponds to
Your electricity supply. We recommend that this appliance is connected to the
mains supply via a suitable switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance become damaged or should it need
Replacing at any time, it must be replaced by a special purpose made mains
Lead which can only be obtained from Shomar Ltd.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted plug is not suitable for your socket, then the plug should be
removed and an appropriate plug fitted. Destroy the old plug which is cut off
as a plug with bared cord could cause a shock hazard if inserted into a socket.
The plug on this appliance incorporates a 13 A fuse. Should the fuse need to
be changed a fuse of the same rating must be used. Ensure that the fuse cover
is refitted.
1. Install the refrigerator on a flat surface in order to prevent vibration
and noise.
2. The cord should be secured behind the appliance to avoid injury
3. Choose a dry well-ventilated place
4. Minimum space in the room where the refrigerator is being installed
is 10 cubic metres.
5. Choose a location where there is no heat source. Keep the refrigerator
away from direct sunlight, oven etc.
Electrical Requirements
Installation Instructions