PowerPoint P125FMDW, Быстрый старт

Страница: 6 / 18

6
the back of the appliance as you may injure your fingers and
hands. Make sure that mains cable is not caught under the
appliance during and after carrying/moving the appliance, to
avoid the mains cable becoming cut or damaged.
Before inserting the plug into the wall socket make sure that the voltage and
frequency shown in the rating plate inside the appliance corresponds to
your electricity supply. We recommend that this appliance is connected to the
mains supply via a suitable switched and fused socket in a readily accessible
position.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted plug is not suitable for your socket, then the plug should be removed
and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with
bared cord could cause a shock hazard if inserted into a socket. The plug on this
appliance incorporates a 13 A fuse. Should the fuse need to be changed a fuse of
the same rating must be used. Ensure that the fuse cover is refitted.

Install the freezer on a flat surface in order to prevent vibration and noise.
If required adjust the levelling feet at the front by turning them.

Choose a dry well-ventilated place.

Minimum space in the room where the freezer is being installed should be
10 cubic metres.

Choose a location where there is no heat source. Keep the freezer away
from direct sunlight, oven etc.
ELECTRICAL REQUIREMENTS
INSTALLATION