POWXG1031
EN
Copyright © 2014 VARO
P a g e
|
9
www.varo.com
10 INSTRUCTIONS FOR CUTTING
See fig 1
10.1
Tree logging
See fig 2
10.2
Branches removal
See fig 3
10.3
Trunk trimming
See fig 4
Second and third picture are ways to prevent blocking of the chain and blade.
11 STARTING UP THE MACHINE
See fig 5
11.1
Assembly of chain bar and chain
See fig 6
Repeat tensioning of new chain after approx. 5 cuts. Check chain tensioning regularly.
11.2
Chain tensioning and adjustment check
See fig 7
11.3
Check of the chain oil level
See fig 8
12 OPERATION
12.1
To start
See fig 9
12.2
To stop
See fig 10
Chain runs out briefly after switching off.
13 SAW CHAIN SHARPENING
See fig 11
14 CLEANING AND MAINTENANCE
Always pull the plug out of the power socket before doing any work on the
chainsaw!
Keep the cooling vents on the motor housing clean and unobstructed at all times.
Only the maintenance work described in these operating instructions may be carried out.
Any other maintenance work must be carried out by our Customer Service.
Do not modify the power saw in any way as this could jeopardize its safety.
Should the chainsaw fail despite our careful manufacturing and inspection procedures,
have it repaired by an authorized Customer Service work-shop.
