Quick Start Guide
25cm 24V Lithium-Ion Cordless Chain Saw CLCS2425
7
8
2
Read all safety instructions carefully before assembling and operating
this machine. Ensure the machine has been assembled correctly and safely. Keep the
instructions safe and pass them on to any subsequent user so that the information is always
available.
WARNING:
Original Instructions
1 Rear Handle
10 Chain Adjustment Ring
19 Support Bolt
2 On/Off Switch
11 Locking Knob (for Chain
Cover)
20 Tensioning Plate
3 Chain Oil Tank
12 Chain Cover
21 Chain Oil
4 Chain Oil Tank Cap
13 Rear Hand Guard
22 Battery Release Button
5 Front Handle
14 Bumper
23 Battery Pack
6 Chain Brake Handle,
Front Hand Guard
15 Lock-off Switch
24 Battery Charger
7 Guide Bar
16 Battery Guide Rails
25 Guide Bar Cover
8 Saw Chain
17 Oil Port
26 Instruction Manual
9 Nose Sprocket
18 Drive Sprocket
Operate
IN THE BOX
PLEASE READ INSTRUCTION MANUAL FOR MORE DETAILS.
Hold the chain saw firmly with both hands, with the right hand on the rear handle and the left hand
on the front handle. Thumb and finger must close securely over the handles.
Ensure the chain brake has been released as arrow 1 shows in figure 7.
To switch on, press the lock-off switch with the right thumb and then press the On/Off switch until
the chain saw runs at the fastest speed. Then release the lock-off switch.
Keep the chain saw running and check: if an oil trace can be seen, the chain saw is working
trouble-free; if no oil trace can be seen, clean the oil passages or contact the After Sales Helpline.
Only use the product with a secure stance. Hold the product to the right-hand side of your body.
Never allow any part of your body to be in the chain line while operating a saw.
Ensure the chain oil level is always above the “MIN” mark during operation.
1
7
10
17
3
4
2
5
22
6
8
9
15
13
14
11
12
16
20
19
18
25
23
26
21
24
Summary of Contents for CLCS2425
Page 3: ......
