background image

 

POWX1724S 

EN

 

Copyright © 2020 VARO 

P a g e

 | 

5

 

www.varo.com 

 

Safety goggles should be worn when using the compressor in order to protect the eyes 
against any foreign bodies lifted by the jet of air. 

 

If possible, when using air-powered accessories, wear safety clothing. 

 

Always maintain a safety distance of at least 2 meters between the compressor and the 
work area. 

 

Check for correspondence between the compressor plate data with the actual 
specifications of the electrical system. A variation of ± 10% with respect of the rated value 
is allowed. 

 

Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency 
complying with current regulations. 

 

Use extension cables with a maximum length of 5 meters and with a cable cross-section 
of not less than 1.5 mm2. Use of extension cables of different length and cross-section 
and also of adapters and multiple sockets should be avoided. 

 

Always use the handle to move the compressor. 

 

When using compressed air, you must know and comply with the safety precautions to be 
adopted for each type of application (inflation, airpowered tools, painting, washing with 
water-based detergents only, clinching, etc.). 

 

To avoid overheating of the electric motor, this compressor is designed for intermittent 
duty operation as indicated on the technical dataplate (for example, S3-15 means 1.5 
minutes On, 8.5 minutes OFF). In case of overheating, the thermal cutout of the motor is 
released, automatically cutting off the power when the temperature is too high due to 
excess current take-off. The motor restarts automatically when normal temperature 
conditions are restored. 

6.2 

D

on’ts 

 

Never direct the jet of air towards persons, animals or your body. 

 

Never let the compressor come into contact with water or other liquids and never direct the 
jet of liquids sprayed by tools connected to the compressor towards the compressor: as 
the appliance is live, this could cause electrocution or short-circuits. 

 

Never use the appliance with bare feet or wet hands or feet. 

 

Never yank the power cable to disconnect the plug from the power outlet or to move the 
compressor. 

 

Never leave the appliance exposed to adverse weather conditions (rain, sun, fog, snow). 

 

If this compressor is used outdoors, always remember to stow it after use in a covered or 
closed place 

 

Never use the compressor outdoors in rain or bad weather. 

 

Never allow inexpert persons to use the compressor without suitable surveillance. Keep 
animals at a distance from the work area. 

 

The compressed air produced by the compressor cannot not be used for pharmaceutical, 
food or medical purposes or to fill the air bottles of scuba divers. 

 

Do not place flammable or nylon/fabric objects close to and/or on the compressor. 

 

Do not cover the air inlets on the compressor. 

 

Do not open or tamper with any part of the compressor. Contact an authorized Service 
Center. 

 

 

Содержание POWX1724S










Отзывы: