POWX0090LI
EN
Copyright © 2013 VARO
P a g e
|
6
www.varo.com
8.2
Inserting and removing the battery (Fig. 2)
Remove the battery pressing the battery latches and at the same time pull the battery
pack off.
To insert the battery, push the battery pack onto the contacts of the tool.
8.3
Switch on/off (Fig. 3)
To start up the LED light, press the ON/OFF switch button (6).
To switch off the LED light, press the ON/OFF switch button (6) again.
Warning: Do not stare directly at the torch beam. Never aim the beam at any
person or an object other than the work piece.
8.4
Adjustable work-light head (Fig 4)
This LED work-light features a pivoting head (2) which enables you to illuminate at
different angles without changing the position of the tool.
The pivoting head can be adjusted to the desired angle between initial position (0 °) and
final position (90 °).
To pivot the head of the work-light, hold the work-light with two hands. One hand holding
the body and the other hand holding the head of the work-light.
Lift the head to adjust the light until the desired angle that is ideal for your job.
To return the work-light to its initial position (0 °), turn the work-light head in the opposite
way.
9 CLEANING AND MAINTENANCE
Clean the housing only with a damp cloth. Do not use any solvents! Dry thoroughly
afterwards .In order to maintain battery capacity ,we recommend the battery to be completely
discharged every one month and fully recharged again .Only store with a fully charged battery
and top-up the charge from time to time if stored for a long time. Store in a dry and frost-free
place, the ambient temperature should not exceed 40°C.
10 TECHNICAL DETAILS
Model nr.
POWX0090LI
Rated voltage (direct current)
18V
Battery type
1500mAh Li-Ion
Charger rated voltage
230V
Charger frequency
50Hz
Charging time
+/-1 hour
Lumen
30 lm
Color temperature
8000-11000 K
11 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
