POW8130
EN
Copyright © 2015 VARO
P a g e
|
4
www.varo.com
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Warning / Danger!
Read manual before use.
Attention Laser radiation! Do not look into the beam. Laser class 2.
In accordance with essential applicable safety standards of European
directives.
Wear gloves
Wear eye protection.
5 CORRECT USE OF YOUR POW8130
The laser crosscut saw is designed to crosscut wood and plastic commensurate with the
machine’s size.
The machine is not to be used for cutting fire wood.
The machine is to be used only for its prescribed purpose.
Any use other than that mentioned is considered to be a case of misuse. The user/operator
and not the manufacturer shall be liable for any damage or injury resulting from such cases of
misuse.
The machine is to be operated only with suitable saw blades. It is prohibited to use any type of
cutting-off wheel.
To use the machine properly you must also observe the safety regulations, the assembly
instructions and the operating instructions to be found in this manual.
All persons who use and service the machine have to be acquainted with this manual and
must be informed about its potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the machine nor for any
damage resulting from such changes.
