Powerplay SPYDER SPY2KCOS, Инструкции по сборке, уходу и использованию

Страница: 12 / 38

12
Operating Instructions
Operation Tips
• When using detergent, fi ll bottle with a properly
formulated detergent-to-water ratio, following
instructions on the container.
•
DO NOT
use thick, gel-like detergents, as they will clog
the power washer and can cause damage.
• It is normal to hear the motor run intermittently when
the trigger is not being squeezed. The pump is priming
itself to operate when the trigger is squeezed.
• Turn off the power washer if not being used after fi ve
minutes.
• The O-rings in the hose should be cleaned regularly
and lubricated with non-water soluble grease such as
petroleum jelly.
• Keep the spray tip cleaning wire nearby for unclogging
the tips.
How to Avoid Damaging Surfaces
• Damage to surfaces being cleaned occurs when
the impact force of the water pressure exceeds the
durability of the surface. Bare wood can be penetrated;
paint can be peeled off, etc. You can vary the force of
the power washer by adjusting:
1. The angle of the nozzle to the surface being
cleaned.
2. The distance from the nozzle to the surface
being cleaned.
•
NEVER
use a narrow, high-pressure stream of water on
soft surfaces.
• When cleaning windows, it is recommended to use
a minimum of 25
°
spray tip to protect the glass. A
0
°
spray tip is to concentrated of a spray and may
shatter the window. Position spray tip at a 45
°
angle,
approximately four to
fi
ve feet away from the window.
Squeeze the trigger and vary the spray pattern and
angle until optimum cleaning ef
fi
ciency is achieved.
Using the Foam Cannon
1. Unscrew fl uid tank from foam cannon valve assembly.
2. Fill
fl
uid tank with water (for best results, use warm
water.)
3. Add 1-3 ounces of your favorite detergent to the
fl
uid
tank.
4. Attach
fl
uid tank to foam cannon valve and attach
assembly to the gun. Use the control knob to change the
fl
ow of soap
+ (
more) or
- (
less).
5. When
fi
nished, run clean plain water through the
pressurized foaming system to purge soap from the
internal components.
Flush with hot water for added cleansing power.
11