PowerPac IVAC POWER2 PPV2000, Руководство пользователя

Страница: 14 / 16

Problem Solving s
Problem Possible Causes How to Solve
The motor will not start
The plug is not properly
inserted in the power
socket. Insert the plug into the
power socket. Do not use
adaptors or extensions.
The switch at the electric
mains is not switched on
and/or the ON/OFF Button
is not pressed.
Turn the electric mains
and/or the ON/OFF Button
on.
The motor has
overheated.
Disconnect the appliance
from the electric mains
and leave the motor to
cool.
The power cable is
defective.
Have the power cable
replaced at an authorised
Service Centre.
Lack of power.
Check that the house main
breaker is on.
The appliance vibrates
The appliance is not
resting
on a stable
surface.
Place the appliance on a
flat, stable surface.
The wheels are worn out.
Have them replaced at an
Authorised
Service
Centre.
The speed used is too
high.
Set a lower speed.
The Dust Cup has not
been correctly locked into
the main body.
Check that the Dust Cup is
correctly locked into the
main body and ensure the
Dust
Cup has been
emptied.
Suction power becomes
weak
The Dust Cup Filter Cover
is not tightly locked in the
Dust Cup. Check that the Dust Cup
Filter Cover is locked in
the Dust Cup
The Dust Cup is full. Empty the Dust Cup.
The Hose, Extension
Tubes, Floor Brush,
Crevice Nozzle, Bristle
Brush and the Filters (Dust
Cup/Air Inlet/Air Outlet)
are clogged.
Unclog the attachments.