SAFETY INSTRUCTIONS
3
When operating this stapler, the operator and others in the work area should
ALWAYS wear approved SAFETY GLASSES, with front and side eye protection
(i.e. OSHA required iZ87i safety glasses). Eye protection will help guard against
fl
ying staples and debris, which could cause severe eye injury.
EAR PROTECTION should be used to prevent hearing damage when there are high
noise levels in the work area. ALWAYS use ear plugs with a noise reduction rated
at 29 db or higher at a construction site.
To prevent accidental mis
fi
re, always
unplug the power cord
before making any
adjustments, repairing, clearing jams or when the stapler is not in use. Do not use on
scaffolding or ladders and disconnect power cord from electricity when transporting
between work areas. Never carry with
fi
nger on switch and be sure switch is off
when plugging in.
Never place any part of the body in the discharge path of the carpet tacker when air
is connected to the stapler. Never point the tool at yourself or others, even if the tool
is not loaded. Never leave the carpet tacker unattended while it is plugged in to a
power source. For safety, keep tools locked up and out of reach of children.
Use only Powernail replacement parts in the repair or maintenance of this carpet
tacker. Parts or repair services are available from the manufacturer or from agents
authorized by the manufacturer. Repairs should be carried out only by trained service
personel in the
fi
eld of fastener driving tools who will observe proper safety controls
while performing maintenance. Service personel should be quali
fi
ed to assess the
safe working condition of fastener driving tools.
When not in use, the tool should be cleaned, fully assembled and then stored in a
dry location. This will extend the life of the tool and reduce any oxidation. To guard
against electric shock, do not use tool in rain or wet envirionment and prevent body
contact with grounded surfaces such as pipes, radiators, ranges, etc.
Keep work area clean. Cluttered work areas invite injuries. Dress properly. Be sure
not to wear clothing or jewelry that may get caught in moving parts. Rubber gloves
and non-skid footwear are recommended when working outdoors. Wear protective
hair covering to contain long hair.
Keep work area well lit. Keep children away and visitors away from work area. Do
not let visitors contact tool or extension cord. Do not operate tool when you are
tired. Always stay alert and watch what you are doing.
Содержание PowerTacker
Страница 11: ...11 Powernail PowerTacker SCHEMATIC...