Rev: 1.1
Page 4 of 13
General Information
Product Introduction
The MTA15Z is a self-contained accessory to the PowerMaster
®
analyzer. This accessory
accommodates testing of any ANSI socket-based meter using a load provided by the
PowerMaster
®
. The MTA15Z includes a zero-insertion force (ZIF) socket that is automatically
configured by the PowerMaster
®
and requires no jumpers for testing. For mechanical meters, the
user can pull the supplied pins for the lid, rotate the case upright, and test appropriately.
Currents are injected via the PowerMaster
®
by the 6mm terminated lead set. Voltages are
injected using the standard voltage lead set, and are fused for each phase on the MTA15Z.
Once the service type is selected in the PowerMaster
®
, the user will select a Phantom Load
Setup to provide the test. Results are saved as normal in the PowerMaster
®
and will be
downloaded using the Meter Site Manager 2 software.
Included Accessories
Qty.
Part #
Description
1
10-340-3309
RS232 Communication Cable
1
10-340-0066
Power Cable
2
22-900-2022
Pull pin for lid
1
10-340-0068
AC power cable (N. America)
1
10-340-0069
AC power supply (100-240V)
1
10-340-4096G
Green safety ground lead
1
50-950-0006
Green alligator clip
Spare Parts
Qty.
Part #
Description
3
34-100-0144
KLKR Fuse 0.5A, 600V, slow acting
2
22-900-2022
Pull pin for lid
Safety
Operation of the PowerMaster
®
and the supplied accessories and adapters can present the user
to potentially hazardous conditions. Please follow all required safety procedures set forth by the
user’s safety organization within the company. If no safety organization exists, please follow all
applicable OSHA rules and standards for PPE (Person Protective Equipment) when working in
high voltage and low voltage environments. This equipment should be used by trained and
qualified personnel ONLY.