Rev: 1.1
Page 11 of 13
2.2 With No Site Selected (Component Test)
STEP 1
At the Main Menu, press “2” for
Component Test.
STEP 2
Press F2 to select “MTA15Z”.
STEP 3
In the Component Test screen,
select the Meter Model and
desired Service Type.
STEP 4
Enter the serial number (MFG
SN) and alternatively the Kt value.
Press F6 to continue.
STEP 5
Hook up pulse pickup to meter
(AUX DIG on PowerMaster).
STEP 6
Select the setup, then press F6 to
continue.
STEP 7
After stabilization is complete and
pulses are detected, press F6 to
continue
STEP 12
After the test is complete, press
F6 to save and exit.