www.powermaxfitness.net
7
3. INSTALLATION INSTRUCTIONS
When installing, simple fix all screws first, then tighten the screws when the installation of frame
is done.
1.
Put the machine flat on the ground. Remove the knob with the direction shown in the
picture bellow. Then stand the columns and console with the direction shown in the
picture bellow.
2.
Remove the preinstalled screws M8*22 on the supporting frame and then tighten the
supporting frame with screw M8*22 on the base. Use 5# hexagon wrench and screw
M6*12 to lock and fix the base (two screws for each side).
3.
Hold left& right columns, use 6# hexagon wrench and screw M8*25 to lock the console
frame on the columns (Tighten all screws in above steps, and please notice not to clamp
the cable by column).
M6*12
M8*22
M8*2
5
