PowerMax PM91001 Скачать руководство пользователя страница 7

10

 

11

 

 

12. ANSWERS FOR COMMON PROBLEMS

 

Q: How much time will it takes to charge the JUMP  START?

 

A: First initial charge is suggested to be 8 hours. After that in a normal 

situation,  3-5  hours  should  charge  up  completely.  The  JUMP 
START  will  shut  down  the  charging  circuit  once  it  is  fully  charged 
(LCD will lighted up) , so you will never over charge the device.

 

Q: How to charge the JUMP START  device?

 

A:  You can  either  charge  it  with  AC  adapter  from  the  wall  outlet.  The 

adapter  is  a  universal  unit  from  110  -240V  50/60  Hz.  Or  you  may 
have an additional optional 12V car adapter as an  accessory.

 

Q:  Car  won't  start,  it  seems  there  is  no  power  provided  from  

JUMP  START.

 

A: Make sure polarities are aligning correctly. Make sure there is more 

than  11.5V  battery  power  indicated  on  the  LCD.  Make  sure  you 
press the "JUMP START" button, otherwise, there will be no power 
transfer  to  the  car.  If  JUMP  START  has  been  stored    under  
extreme  cold  weather  conditions,  allow  it  to  reach  to  a  warmer 
temperature by starting your car for a few  times.

 

Q:  Will  the  unit  blow  up  if  I  short  circuit  the  RED  and  BLACK 

terminal  together?

 

A:  NO  absolutely  NOT!    Unlike  other  products  in  the  market  place,  

the  JUMP  START  has  a built-in  polarity  safety  circuit  to  shut  itself 
down for your extra  protection.

 

Q:  My  car  battery  has  zero  power  and  JUMP  START  does  not  

pass polarity  test!

 

A:  If  you  car  battery  has  absolutely  no  power  (<4V),  you  need  to 

override  the  JUMP  START  safety  polarity  check  circuit  in  order  to 
send power to the car. First, make sure you put the correct polarity 
terminal  onto  to  the  battery,  then  hold  and  press  the 

“JUMP 

START"  button  for  3  second,  this  will  allow  the  unit  to  by  passing 
the  polarity  test.  Wait  for  another  30  second,  then  the  power  will 

flow into the car battery and get ready to jump start.

 

Q:  I  have  tried  to  boost  a  vehicle  but  not  successful.  The  JUMP 

START  is  now  disabled  with  no  LED  work  light  or  5V  USB 
power.

 

A:  In  case  of  this  situation,  you  might  have  triggered  the  safety 

protection  circuit  for  the  DC  outputs  and  this  locked  out  all  output 
power  functions.  To  unlock  and  reset  the  unit;  simply  charge  the 
unit  with  AC  plug  or  DC  car  charger  (if  so  equipped).  The  unit 
should  take  charge  in  a few  minutes  and  return  to  a  normal  state. 
For  any  reason  if  this  does  restart,  please  contact  factory  or  your 
authorized  distributor.

 

13. STATEMENT OF LIMITED WARRANTY

 

Our  company  warrants  that  each  device  1)  is  free  from  defects  in 

materials and workmanship and 2) conforms to our company's official 

Published  Specifications  which  are  available  on  request.    The 
warranty  period  for  the  device  starts  on  original  date  of  purchased; 
one(1)  year  parts  and  labor  for  the  entire  unit  except  for  the  battery 
which  has  a    six(6)  months  warranty.    The  date  on  your  invoice  or  
sales  receipt  is  the  date  of  purchased  unless  our  company  or  your 
reseller  informs  your  otherwise.  Unless  our  c

ompany  specifies 

otherwise,  these  warranties  apply  only  in  the  country  or  region  in  
which you purchased the device.

 

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND 
REPLACE  ALL  OTHER  WARANTIES  OR  CONDITIONS,  EXPRESS 
OR  IMPLIED,  INCLUDING,  BUT  NOT  LIMITED  TO,  THE  IMPLIED 
WARRANTIES  OR  CONDITIONS  OF  MERCHANTABILITY  AND 
FITNESS  FOR  A  PARTICULAR  PURPOSE,  SOME  STATES  OR 
JURISDICTIONS  DO NOT  ALLOW THE EXCLUSION  OF  EXPRESS 
OR IMPLIED WARANTIES, SO THE ABOVE EXCLUSION MAY NOT 
APPLY  TO  YOU.  IN  THE  EVENT,  SUCH  WARRANTIES  ARE 
LIMITED  IN  THE  DURATION  TO  THE  WARRANTY  PERIOD.  NO 
WARRANTIES  APPLY  AFTER  THAT  PERIOD.  SOME  STATES  OR 
JURISDICATIONS  DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG 
AN IMPLIED WARRNATY LASTS, SO THE ABOVE LIMITATION MAY 
NOT APPLY TO YOU.

 

This warranty does not cover the following:

 

·

 

failure  resulting  from  misuse,  accident,  modification,  unsuitable 
physical  or  operating  environment,  or  improper  maintenance  by 
you.

 

·

  failure  caused  by  a  product  for  which  our  company is not

 

responsible; and

 

·

  any non our company approved products.

 

The  warranty  is  voided  by  removal  or  alternation  of  identifications 
labels on the device or its parts.

 

This warranty does cover the following:

 

·

 

 

any   manufacture  defects  that  are   under  normal  operation

 

 circumstance.

 

For  warranty  claims  or  repair,  please  contact  your  local  reseller  or 
authorized distributor. Or simply call 888-832-3557

 

Содержание PM91001









Отзывы: