第 5 页 共 16 页
No
Appearance
Description
10
Temporary accelerate speed key
：
Press the button to temporary increased sewing speed
.
11
Temporary deceleration speed key:
Press the button to temporary reduced sewing speed.
12
Trimming key
：
Select/Cancel automatic trimming. The trimming status is displayed on top of LCD
screen. Detailed see "3.1.5 trimming set.
13
Press foot lifting key:
Every effective pushed the key once; round with trimming after press foot
lifting, sewing end press foot lifting and manual press foot lifting. The current status is displayed
on top of LCD screen. Detailed see "3.1.4 press foot lifting set.
14
One-Shot-Sewing key
：
Select/Cancel one-Shot-Sewing, it is effective only into
multi-segment
sewing mode, when chose one-shot sewing, one-shot foot pedal can complete one needle of
multi-segment sewing
；
The one-shot-sewing status is displayed on top of LCD screen. Detailed
see "3.1.6 trigger set.
15
Gripper switch key:
It is used to select the folder line function on and off, open the clamp
function LCD screen below will display folders line status, for details see "3.1.9 clamp set."
3 System Parameter Setting Description
3.1 Operator Mode
In this mode, various sewing modes are available after technical parameters settings. As the
default setting, the system enters this mode when it starts. Under this mode, such basic
functions as normal sewing work and modes change can be realized but no change inside
parameters and setting.
：
During working, if long time without press button, HMI will change to idle status
automatically, and will cancel the operation before.
3.1.1 Sewing Mode Setup
·
Free sewing mode
:Press
key, free sewing mode icon
is lightened in LCD area. LCD
indicates free sewing mode has been selected; it is ready just step the pedal for
operation.
·
Multi-segment sewing mode
:
Press
key, constant-stitch sewing icon
is lightened
in LCD area. LCD
is multi-segment sewing status
。
Use
keys
and
keys to choice the N segment, and press
key to entry multi-segment
sewing stitch number of each segment setup status
. You may use
