Powermatic 2800, Инструкция по эксплуатации и каталог запасных частей

Страница: 6 / 28

6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a Powermatic Model 2800 Drill Press. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. This machine has been designed and constructed to provide years of trouble free operation if
used in accordance with instructions set forth in this manual. If there are any questions or comments,
please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web
site: www.wmhtoolgroup.com.
Specifications
Model Number .............................................................................................................................. 2800
Stock Number .........................................................................................................................1792800
Swing (in.) ........................................................................................................................................ 18
Maximum Drilling Capacity (in.) ........................................................................................................ 5/8
Chuck Size (in.) ............................................................................................................................... 5/8
Spindle Travel (in.)........................................................................................................................ 4-3/8
Maximum Spindle to Table Distance (in.)...................................................................................... 26-1/2
Maximum Spindle to Base Distance (in.) ............................................................................................ 47
Table Size (LxW)(in.) .................................................................................................................16 x 14
Table Size Fully Extended (LxW)(in.) ..........................................................................................16 x 26
Spindle Taper ....................................................................................................................... MT2 x JT3
Column Diameter (in.) ................................................................................................................... 3-1/8
Range of Spindle Speed (RPM) ........................................................................................... 400 to 3000
Base Size (in.) ............................................................................................................... 11-7/8 x 19-5/8
Motor ........................................................................................ TEFC, 1HP, 115/230V (pre-wired 115V)
Overall Dimensions (HxWxD)(in.)............................................................................. 68-1/2 x 20 x 31-1/2
Approximate Net Weight (lbs.) ......................................................................................................... 209
Approximate Shipping Weight (lbs.) ................................................................................................. 230
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.