8
6.0
Specifications
Model number .................................................................................................................................................... PM1000
Stock numbers:
Saw unit only, without Accu-Fence or rail system ......................................................................................... 1791000
Saw with 30” Accu-Fence and rail system ..................................................................................................1791000K
Saw with 50” Accu-Fence and rail system ..................................................................................................1791001K
Motor and electricals:
Motor type ................................................................................ totally enclosed fan cooled, induction, capacitor start
Horsepower .................................................................................................................................................. 1-3/4 HP
Phase ............................................................................................................................................................... single
Voltage ........................................................................................................................................................115/230V
Cycle .................................................................................................................................................................. 60Hz
Listed FLA (full load amps) ........................................................................................................................... 15/7.5 A
Motor speed ............................................................................................................................................... 3450 RPM
Starting amps ...................................................................................................................................................... 74 A
Running amps (no load) .................................................................................................................................... 2.7 A
Start capacitor ................................................................................................................................ 300MFD, 125VAC
Run capacitor ...................................................................................................................................... 70
F, 250VAC
Overload reset ............................................................................................................. manual push button on motor
Power transfer ............................................................................................................................................poly v-belt
On/off switch ................................................................................................... magnetic, push button with safety key
Motor speed ............................................................................................................................................... 3450 RPM
Power cord............................................................................................................................. 14 AWG, 6 ft. (183 cm)
Power plug installed .............................................................................................................................................. yes
Recommended circuit size
1
................................................................................................................................. 20A
Sound emission .............................................................................. 80 dB at 30 " (762 mm) from blade, without load
1
subject to local/national electrical codes.
Arbor and blade*:
Blade diameter ....................................................................................................................................... 10" (254mm)
Arbor diameter ................................................................................................................................... 5/8" (15.88mm)
Arbor speed ........................................................................................................................................................ 4200
Arbor lock.............................................................................................................................................................. yes
Arbor wrench included .......................................................................................................... combination 17 / 27 mm
Maximum depth of cut at 90 degrees .................................................................................................. 3-1/8" (79 mm)
Maximum depth of cut at 45 degrees .................................................................................................. 2-1/8" (54 mm)
Maximum rip to right of blade ...................................................................................................................... 30" or 52"
Maximum rip to left of blade .................................................................................................................. 12" (305 mm)
Dado maximum width ..................................................................................................................... 13/16" (20.6 mm)
Dado maximum diameter ........................................................................................................................ 8" (200 mm)
Blade height per one revolution of handwheel ................................... 19/64" (7.5mm) for 90°; 1/16" (1.7 mm) for 45°
Blade tilt ............................................................................................................................................ left, 0 to 45 deg.
*blade not included
Materials:
Main table ......................................................................................................................................... ground cast iron
Extension wings ................................................................................................................................ ground cast iron
Trunnion ....................................................................................................................................................... cast iron
Enclosed cabinet ................................................................................................................................................ steel
Table:
Main table dimensions ................................................................................................ 20" L x 27" W (508 x 686 mm)
Table dimensions with wings .................................................................................... 40" L x 27" W (1016 x 686 mm)
Table area in front of blade at maximum height .................................................................................... 10" (305 mm)
Table height from floor, approximate .............................................................................................. 34-1/4" (870 mm)
Miter T-slot ......................................................................................................... two at 3/4" W x 3/8" D (19 x 10 mm)
Edge bevel ........................................................................................................................................................... front
Dimensions:
Cabinet footprint ................................................................................................... 23" W x 24-1/2" L (584 x 622 mm)
Overall dimensions of shipping carton (cabinet only) .......... 30-1/2” L x 27-1/2” W x 43-3/4”H (77.5 x 70 x 111.4 cm)
Overall dimensions, fully assembled, accessories mounted:
with 30" rip ................................................................................. 43" W x 61" L x 44" H (1092 x 1549 x 1117 mm)
with 52" rip ................................................................................. 43" W x 83" L x 44" H (1092 x 2108 x 1117 mm)
