Powermate pw0501400, Руководство по эксплуатации

Страница: 6 / 14

6
Pressure Washer
! IMPORTANT !
This pressure washer is equipped with a microswitch sensitive to water flow. This Instant
Start/Stop switch (ISS) senses water flow in the pump. When the trigger is released,
water stops flowing through the pump. The ISS then automatically turns the motor off
to protect pump from overheating.
OPERATION
1. Pull trigger on gun.
2. Turn the “ON/OFF” switch to “ON”.
3. R e l e a s e t r i g g e r. T h e p r e s s u r e w a s h e r m o t o r w i l l s t o p r u n n i n g .
4. To spray again, pull trigger and motor and pump will restart.
Note: Occasionally the motor may run for a short time to bring fresh, cool water into
the pump even if trigger is released. This is part of normal operation and will not damage
the unit.
Risk of Injection.
Unit will start spraying when trigger is squeezed if ON/OFF switch is in “ON”
position. Always point gun in safe direction.
Always turn the “ON/OFF” switch to “OFF”, then trigger gun to
release hose pressure before unplugging power cord.
Risk of equipment damage. Always make sure the “ON/OFF”
switch on the unit is “OFF” and unit is unplugged prior to storage.
!
WARNING
!
CAUTION
NOTICE