background image

4

Use only extension cords intended for outdoor
use. These are identified by the marking
“Acceptable for use with outdoor appliances;
store indoors while not in use”. Use only
extension cords having an electrical rating
equal to or more than the rating of the product.
Do not use damaged extension cords. Examine
extension cord before using and replace if
damaged. Do not abuse extension cord. Do
not pull on the cord to disconnect. Keep cord
away from heat and sharp edges. Always
disconnect product from extension cord.

NOTE: 

Do not use 16 or 18 AWG

common extension cords on this
product.

Failure to follow these

instructions can result in serious injury,
including death.

14 AWG

Yes

No

12 AWG

Yes

Yes

REFER TO ASSEMBLY INSTRUCTIONS

FOR ASSEMBLY, SET-UP AND

CONNECTION PROCEDURES

To  reduce the risk of

electrocution, keep all connections
dry and off the ground. Do not touch
plug with wet hands.

PW0501400

2250

1500 psi

1.5 GPM

13 Amps

120V

100

°

F

26 lbs.

Specifications

Please read and save these instructions. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in
personal injury and/or property damage! Retain instructions for future reference.

Safety and Warning Information (Continued)

Pressure Washer

!

DANGER

!

WARNING

Extension
Cord size

Allowable length
25’

50’

Model

Cleaning

Power

Max.

Pressure

with

Standard

Lance

Max.

Capacity

Motor

Power

(single
phase)

Voltage

Max.

Inlet

Water

Temp.

Unit

Weight

Assembly Instructions

Содержание pw0501400















Отзывы: