Powermate P-WFT-16022 Скачать руководство пользователя страница 2

Страница: 2 / 50

Questions? Call Toll Free at 1-800-737-2112

Oil Fill Location

Do Not Overfill

Gasoline Fill Location

Slow Throttle

Fast Throttle / Start Position

Engage Trimmer Head

Disengage Trimmer Head

Engine Stop

PUSH TO PRIME

Push primer 3 times before starting a

cold engine. Important: Do not prime to

restart a warm engine.

Indicates WARNING, DANGER, or

CAUTION.

Wear eye protection complying with

ANSI Z87.1 and hearing protection.

Read operator’s manual before operating

this machine. Failure to follow directions

could result in serious injury.

Disconnect spark plug wire when not

in use or before servicing, cleaning, or

performing maintenance on the unit.

Thrown objects. Remove all rocks, stones,

and foreign objects which could be thrown

by machine

Rotation direction of trimmer line

Keep bystanders at a safe distance (15m

/50 ft). NEVER use if children are present.

Engine exhaust contains carbon

monoxide, an odorless and deadly gas.

NEVER run unit indoors or in a poorly

ventilated area.

NOT

trim up and down slopes. Trim

across slopes.

NOT

touch hot muffler or cylinder.

These parts are extremely hot from

operation and may remain hot for a short

time after operation.

Rotating parts can cause serious injury.

Keep hands and feet away.

To reduce risk of fire, clean spilled gas

and oil and keep unit free from debris.

Gasoline is extremely flammable. Allow

machine to cool before refueling.

Safety Definitions

• Save these instructions

Safety Warning Symbols

Control and Operating Symbols

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor/moderate injury, or

equipment/property damage.

DANGER

CAUTION

WARNING

The following symbols are used on the product and in this manual to alert the operator of potential safety hazards. Read

them carefully, and understand their meaning.

Safety Alert Symbols

The following symbols can be found on your trimmer. Carefully read and understand their meaning.

Important

Safety

Information

15m/50ft

Содержание P-WFT-16022



















































Результаты поиска

Содержание P-WFT-16022

Отзывы:

Похожие инструкции для P-WFT-16022

Бренды по названию

Популярные бренды

Powermate P-WFT-16022, Руководство оператора

Результаты поиска

Содержание P-WFT-16022

Отзывы:

Похожие инструкции для P-WFT-16022

Бренды по названию

Популярные бренды