Powermate King Pro P-WLE-1639 Скачать руководство пользователя страница 21

Страница: 21 / 44

Questions? Call Toll Free at 1-800-737-2112

METL

warrants that the product engine is free from defects in materials and workmanship which cause such engine to fail to conform

with the U.S. EPA or State of California emissions standards for small spark-ignited nonroad (off-road) engines – as applicable to your

METL

product. Small spark-ignited off-road engines manufactured after January 1, 1995 and sold in the State of California and U.S. EPA-

certified small spark-ignited nonroad engines manufactured in model year 1997 or later and sold in all of the United States are covered

by this Emission Control System Warranty for a period of two years from the date of delivery to the original purchaser. This Emission

Control System Warranty is transferable to each subsequent purchaser for the duration of the warranty period. Emission Control System

Warranty repairs or replacements will be made without charge for diagnosis, parts or labor. A list of warranted parts is provided below.

Normal maintenance items, such as spark plugs, air filters and fuel filters that are included on the list of warranted parts are warranted

only up to the first scheduled required replacement interval for such item, as set forth in the Operator’s Manual. If any emission control

system part is repaired or replaced under the Emission Control System Warranty, it shall be warranted for the remainder of the applicable

warranty period.

METL

will also repair or replace other engine components damaged by a failure of any part covered by the Emission Con-

trol System Warranty during the Emission Control System Warranty Period. Only parts authorized and approved by

METL

may be used

in the performance of any Emission Control System Warranty repairs or replacements and will be provided without charge to the owner.

Unapproved, add-on, modified, counterfeit and/or “gray market” parts may not be used to modify or repair the

METL

engine. If such a part

has been used in the repair or maintenance of your engine, and an

METL Authorized Service Center

determines it is defective or causes a

failure of a part covered under the Emission Control System Warranty, your claim for repair of your engine or product may be disallowed.

METL

shall not be held liable hereunder for failures of any warranted parts caused by the use of such an unapproved, add-on, modified,

counterfeit and/or “gray market” part.

You must take your power equipment engine or the product on which it is installed, along with evidence of the date of the sale to the

original purchaser, at your expense, to any

METL Authorized Service Center

during its normal business hours. To locate your nearest

METL

Authorized Service Center

, call (800) 737-2112. The product owner shall be responsible for any expenses or charges incurred for service

calls or transportation of the product or equipment engine to and from the

METL Authorized Service Center

, including any and all damages

or losses incurred during such transportation or shipment.

Failures other than those resulting from defects in material or workmanship are not covered by this Emission Control System Warranty.

This Emission Control System Warranty does not extend to emission control systems or parts which are affected or damaged by owner

abuse, neglect, improper maintenance, misuse, mis-fueling, improper storage, accident and/or collision, the incorporation of, or any use

of, any unapproved, add-on, modified, “graymarket” or counterfeit parts, unsuitable attachments, or the unauthorized alteration of any

part. This Emission Control System Warranty does not cover the regular replacement of normal maintenance items made in connection

with required maintenance services after the item’s first scheduled replacement, as set forth in the Operator’s Manual (e.g. spark plugs,

air filters, fuel filters, etc...).

METL

disclaims any responsibility for loss of time or use of the engine, or the equipment in which the engine is installed, transportation,

commercial loss, or any other incidental or consequential damage. Any implied warranties are limited to the duration of this written limited

warranty. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of

incidental or consequential damages, so the above exclusions and limitations may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Warranty

(Continued)

• Save all instructions

How to Obtain Warranty Service:

Exclusions:

Limitations of Liability:

Warranty Coverage:

Содержание King Pro P-WLE-1639













































Результаты поиска

Содержание King Pro P-WLE-1639

Отзывы:

Похожие инструкции для King Pro P-WLE-1639

Бренды по названию

Популярные бренды

Powermate King Pro P-WLE-1639, Руководство оператора

Результаты поиска

Содержание King Pro P-WLE-1639

Отзывы:

Похожие инструкции для King Pro P-WLE-1639

Бренды по названию

Популярные бренды