Powermat Charging Spot 4.0, Руководство по установке, Страница: 3 / 14

© 2018 Powermat Technologies Ltd. All rights reserved. 3
Safety, Warnings & Disclaimers

Powermat Charging Spot 4.0 is designed to be installed by Powermat certified installers only
 Opening of, and/or repairing of the device should only be done by an authorized specialist

Do not install the device under an electrical conductive surface

Never use the device if it is damaged or wet
 Observe a sufficient distance from warm and/or wet elements

Charging Spot minimal distance from table edge should be no smaller than 10cm (regulation clearance for human body exposure)

Do not install the Charging Spot outdoors

Make sure all electrical connections and power supply cables comply with your local electrical code and regulations

Keep all parts out of reach of children

Never replace damaged power supplies yourself! Disconnect the devices and contact a specialist

ESD Safety - To avoid potential ESD damage to the Charging Spot:

Wiring and connections should always be done when the power is ‘OFF’

Avoid touching the Charging Spot electronic circuit when the unit is connected to power

Compliance with local and regional code:

All components provided are certified according to rules and regulations

Compliance with any codes, rules and regulations as far as wiring, wiring methods, and techniques lies entirely with the inst aller

Please verify these codes, rules and regulations before starting any installation