9
DURING INSTALLATION
▲
1. Be aware of all moving parts and avoid close
proximity to any pinch points.
▲
2. Disconnect power at the control panel before making
any electric service connections. Connection
location for controls and safety equipment can be
found on the wiring diagram, and in this manual.
▲
3. Know the procedure for engaging and manually
operating the unit.
▲
4. Adjust the open and close force adjustment on the
control board in each direction to the minimum force
required to operate the gate smoothly.
DO NOT
increase the force adjustment setting to makeup
for rough spots in gate travel - FIX THE GATE
INSTEAD!
▲
5. Locate the controls at least 10 feet from the moving
gate so that the user can observe the gate operation,
but is not able to come in contact with the gate while
operating the controls.
10
▲
6. Attach large warning signs provided to each side
of gate in the most conspicuous place. Mount
control station and smaller warning placard
together within sight of the gate opening.
WARNING
Moving Gate Can Cause
Serious Injury or Death.
KEEP CLEAR! Gate May Move
at Any Time. Children Should
Not Operate Gate. Operate
Gate Only When Area is in
Sight and Free of People
and Obstructions.
AFTER INSTALLATION
▲
You are responsible for ensuring that the end
user understands the basic operations and
safety systems of the unit,
INCLUDING THE
MANUAL OPERATION PROCEDURE.
▲
Point out that the safety instructions in
brochure are the responsibility of the end user,
and then
LEAVE THIS MANUAL WITH THE
END USER
