Powermania Turbo M212V2, Руководство по эксплуатации

Страница: 20 / 25

19 www.powermaniausa.com
Other Information
FUSE REPLACEMENT INSTRUCTION
•
Make sure the charger’s AC power cord is unpluged, and all the DC outputs are discon-
nected from batteries.
•
For cylinder style fuse holders used in 12 Amp and 20 Amp models, use a towel or clothe
to enhance grip to pull open the fuse holder. Twist and then turn while pulling, but do not
bend the fuse holder as it will break the fuse inside.
•
For matchbox style fuse holder used in 30 Amp and 40 Amp models, open the cap.
•
Remove the blown fuse by pulling it straight up and out. Do not apply excessive squeezing
force as it can break the fuse. If the fuse is broken inside the fuse holder, use long nose pli-
ers to remove the broken pieces.
•
For cylinder style fuse holder, use pliers to gently press the rubber enclosure as illustrated
in the drawing below. When installed preoperly the round metal plate will be securely tight-
ened inside the fuse holder. Do not apply excessive force as it could bend the inner metal
plate which makes it difficult when inseting the new fuse.
•
For the matchbox style fuse holder, use long nose pliers to gently push in the U-shaped
section of the metal plate to form a horseshoe shape. This will maximize the conducting
area between the fuse and the holder and provides for proper connection and heat dissipa-
tion.
Cylinder
style
Matchbox
style
•
Always replace a new fuse of the same rating. Use the following table for the correct fuse
rating for your particular model.
Style Model Fuse Rating
Cylinder M212V2 15 Amp
Cylinder M220V2 / M320V2 25 Amp
Matchbox M230V2 / M330V2 / M430V2 / M240V2 / M340V2 / M440V2 45 Amp
•
Make sure the new fuse is pushed into the holder securely.
•
Ensure to secure the the cap/holder together.