PowerLogic EGX200, Инструкционный бюллетень

Страница: 33 / 56

63230-314-200/A2 Chapter 5—Operation
8/2001 Chapter Contents
29
© 2001 Schneider Electric All Rights Reserved
CHAPTER 5—OPERATION
CHAPTER CONTENTS
CHAPTER CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ACCESSING THE EGX200 OVER A NETWORK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Logging into the EGX200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
EGX200 EMBEDDED WEB PAGE OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Communications Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Ethernet Port Setup via LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Serial COM Port Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Device List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Password Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Administrator Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
User Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Logging Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ACCESSING THE EGX200 OVER A NETWORK
This section tells how to access the EGX200 over a network or the Internet. After you
set up Ethernet parameters using HyperTerminal or a web browser, the EGX200 is
accessible via an Ethernet LAN and a web browser such as Internet Explorer. The
following section describes this process.
Logging into the EGX200
To log into the EGX200, follow these steps:
1. Launch your web browser (Microsoft’s Internet Explorer v. 5.0 or higher).
2. In the address field (see Figure 5–1), type the IP address of the EGX200 (for
example, 150.200.250.50), and press Enter.
Figure 5–1: IP address entered in browser address field