PowerLogic EGX200, Инструкционный бюллетень

Страница: 12 / 56

8 © 2001 Schneider Electric All Rights Reserved
Chapter 3—Getting Started 63230-314-200/A2
EGX200 Initial Setup 8/2001
EGX200 INITIAL SETUP
Before configuring the EGX200, obtain a unique static IP address, subnet mask, and
router IP address from your network administrator.
There are two ways to initially set up and assign the EGX200 Ethernet parameters:
• Using a Web Browser
• Using HyperTerminal
Setup Using a Web Browser
The EGX200 has a web server that includes embedded pages that let you configure
Ethernet and serial communication parameters, add serial devices, enter passwords,
and access diagnostics. The EGX200 ships with a default IP address (10.10.10.10)
and a subnet mask default address (255.255.255.0) that can be used to access these
web pages. The Communication Settings web page is used to set up the desired IP
address, subnet mask, and router IP address to match the network configuration.
To access the EGX200 Communication Settings web page using a browser, follow
these steps:
1. Connect a cross-over Ethernet cable from the EGX200 to the PC, as shown in
Figure 3–1.
Figure 3–1: Connecting PC to EGX200 using cross-over Ethernet cable
Table 3–2: Options for Ethernet Communications Setup
Option Selection Description Default
IP Address The EGX200 Ethernet IP network address (static IP required) 10.10.10.10
Subnet Mask The Ethernet IP subnet mask address of your network 255.255.255.0
Router IP Address The router used for wide area network (WAN) communications 0.0.0.0
Cross-over
Ethernet cable
To Earth ground
Connect to 24Vdc
power source
-
+