11
Tilt alarm
‣
Once the unit has been levelled off the tilt alarm can be enabled by pressing
the tilt alarm button. The tilt alarm indicator light will flash for approximately
15 seconds. Once the light is constant the alarm is enabled.
‣
If the unit is disturbed while the alarm is active the unit will need to be
powered off and on again to reset its level position.
Setting up grades / slopes
‣
To create slopes and grades enter into manual mode by pressing
the manual / automatic mode button.
‣
The manual / automatic mode indicator will light up when in manual mode.
‣
To adjust the grade use the Y-axis up or Y-axis down arrows.
‣
To cancel out of manual mode press the manual / automatic mode button.
