•
Try splitting the log again. If the log still does not split, it means the hardness of the
log is higher than the maximum power capacity of the Log Splitter. Continuing to force
the log may just damage the Log Splitter.
•
Do not leave the Log Splitter running unattended. If you need to move away from the
Log Splitter, turn it off first and just turn it back on when you return. When done using
it, turn the Log Splitter off and unplug the power cord.
•
Do not operate the Log Splitter near any flammable materials such as natural gas
tanks or fuel cans.
Recommended Log Size Capacity
The recommended log dimensions for the Log Splitter are 520 mm (length) × (50 - 300) mm
(diameter). The specified diameters are more for reference. What is more important is the
hardness of the log and the Log Splitters capability to split it. Hard logs with knots may be
too difficult for the Log Splitter to split.
UNPACKING AND CHECKING BEFORE INSTALLATION
Before installing and using the Log Splitter, remove all the components from the packaging
and check if they are complete and in good condition. Sort and check all the components
for damages. If there are any damaged or missing components, please report it immediately
to your dealer.
Figure 1：List of major components
Check the components based on the following list in Figure 1.
A： Log guiding plates
F： Electrical motor switch
B： Log pusher
G： Electrical motor assembly
C： Operating handle assembly
H： Supporting feet
D： Wheel and frame
I： Main Body
E： Oil pump
J： Splitting wedge
All the necessary screws, bolts, washers and jigs are in a separate box. (See attached parts list).
5
A
B
C
D
E
F
G
H
I
J
