Powerhorse 750126, Руководство пользователя, Страница: 32 / 34

Engine Operation
32
5. Disconnect spark plug wire and remove spark plug using provided spark plug
wrench.
6. Add one teaspoon oil through spark plug hole.
7. Place rag over spark plug hole and turn starter (or pull the recoil) a few times to
lubricate the combustion chamber.
8. Replace spark plug, but do NOT reconnect the spark plug wire.
Removal from
storage WARNING
Gasoline is highly flammable and explosive, and you can be burned or seriously
injured when handling fuel.
Draining fuel:
1.
Turn the fuel valve to the OFF position.
2. Place a UL approved container below the carburetor; use a funnel to avoid
spillage.
3. Remove the carburetor drain bolt and gasket.
4. Turn the fuel valve to the ON position to drain fuel into a UL approved
container.
5. Reinstall and tighten the drain bolt and gasket.
Storage time Service item
Within one month Use
One-two months Drain original fuel and refuel.
Two months - one year
Drain original fuel and refuel;
Empty and clean the fuel valve sediment cup.
Empty and clean the carburetor bowl.
One year or longer
Drain original fuel and refuel;
Empty and clean the fuel valve sediment cup;
Empty and clean the carburetor bowl.
High Altitude
Operation
CAUTION
: Operating at an altitude of greater than 2000 feet (610 meters) may
affect your engines performance, fuel consumption, and emissions. To remain
emissions compliant and improve engine performance at higher altitudes, a high-
altitude kit is required. A high altitude kit includes a carburetor jet resized to help
correct air / fuel mixture at altitude. To order a high altitude kit or if you have
additional questions, go to www.northerntool.com or contact us at 1-866-443-
2576 – Powerhorse. Please note, engines with the high-altitude kit installed
operated at lower altitudes could cause severe engine damage and affect emissions
compliance. When modified, a tag or decal should be added to the product stating
that a high-altitude kit was installed and to remind you to re-service the carburetor
(re-jet) when operating in lower altitude environments.