PowerPallet User Manual
Page
12
of
29
6) Gently lift and slide this assembly on to the corresponding shaft of the pallet-jack (The assembly can
be held in place by mounting on one of the pallet-jack wheels behind it).
7)
a)
Slide the other mounting plate on to the opposite side and secure it to the PowerPallet with the
M8 flat-head screws.
b) Secure the other end of the cylindrical spacer rod between the 2 mounting plates with the M5
flat-head screw.
c) Readjust the screws on both sides (if necessary) to securely mount the PowerPallet
symmetrically about the wheel mounting shaft.
8) Slide the pallet-jack wheels back on to the shafts, secure them with the snap-rings using the snap-
ring pliers, and reattach the wheel end caps.
9) Make sure the screw-jack assembly is
secured by the fasteners with the drive-
spring properly mounted.
