I
NSTRUCTIONS
M
ANUAL
D
IGIT
3001
R
ELEASE
.
N.2_M
13_10_08
P
OWERGEN
S.
R
.
L
.
V
IA
XXV
A
PRILE
,
5
L
OC
.
C
ORSALONE
C
HIUSI DELLA
V
ERNA
(A
REZZO
)
)
+39-(0)575-531015 - T39-(0)575-511891 E mail
www.batterychargerpowergen.it
P.Iva 01572290516
- 12 -
GLOSSARY
Symbol
Description
Prog
PROGRAMMING
Bdis
BATTERY DISCONNECTED
Stop
CYCLE STOPPED
End
CYCLE CONCLUDED
Umin
BATTERY MINIMUM VOLTAGE
Umax
BATTERY MAXIMUM VOLTAGE
Equ
EQUALIZED CHARGE CYCLE
Sto
CYCLES REALIZED (THE LAST 10)
Def
DEFAULT PARAMETERS
8.1.
Operation mode: PROGRAMMING
DIGIT 3001 is fully programmable in all its functions and widely configurable in every
charging parameter. This feature gives the card extreme flexibility, thus facilitating its use
in numerous applications.
Following parameters can be set via this card:
-
amount of stages
-
rated battery voltage
-
battery threshold voltage
-
charging time in timed charging cycle
-
maximum safety cycle time
-
battery minimum voltage
-
battery maximum voltage
-
battery minimum current
-
charging mode
-
capacity delivered to the battery.
After selecting
programming
mode and after connecting at least one of the supply
sources, “
ProG
”
will be shown on the display and the User will be enabled to set
the charging parameters. By pressing “
A/V
” button in the middle the User will be able to
browse the programming menu, to scroll the lines and to confirm the settings. Setting
values are increased and decreased via the “
EQU
” button on the right-hand side and the
“
ON/OFF
” button on the left-hand side, respectively. The auto repeat function is
implemented in the right and left hand buttons. This allows to automatically increase or
decrease the setting values by keeping relevant button pressed.
