material to determine particular application. Level is required for a particular
application.
Operating Instructions
¾
Apply the power tool to the screw only when it is switched off. Rotating tool
inserts can slip off.
Screw driving operation
First, slide the action mode change lever to the position of
symbol and select the
fastening torque.
Place the point of the driver bit in the screw head and apply pressure to the tool.
Start the tool slowly and then increase the speed gradually. Release the switch 3 as
soon as the clutch cuts in.
CAUTION:
z
Make sure that the driver bit is inserted straight in the screw head, or the screw
and/or bit may be damaged.
z
When driving wood screws, predrill pilot holes to make driving easier and to
prevent splitting of the workpiece. See the chart.
z
If the tool is operated continuously until the battery pack has discharged, allow
the tool to rest for 15 minutes before proceeding with a fresh battery.
Nominal diameter of wood screw
(mm)
Recommended size of pilot hole (mm)
3.1 (1/8)”
2.0 - 2.2 (5/64” - 3/32” )
3.5 (9/64)”
2.2 - 2.5 (3/32” - 3/32” )
3.8 (5/32)”
2.5 - 2.8 (3/32” - 7/64” )
4.5 (11/64)”
2.9 - 3.2 (7/64” - 1/8” )
4.8 (3/16)”
3.1 - 3.4 (1/8” - 9/64” )
5.1 (13/64)”
3.3 - 3.6 (1/8” - 9/64” )
15
Содержание PG14CD
Страница 2: ...1 9 10 ...
