PowerG PG14CD, Руководство пользователя

Страница: 10 / 22

9
k) Do not use an extension cord unless it is absolutely necessary. The use of an
improper extension cord could cause the risk of fire, electric shock or
electrocution.
l) Do not use the charger if it has been subjected to a heavy knock, dropped or
otherwise damaged in any way. Take the charger to an authorized service
centre for a check or repair.
m) Do not disassemble the charger. Take it to an authorized service centre when
service or repair is required. Incorrect re-assembly may result in the risk of fire,
electric shock or electrocution.
n) To reduce the risk of an electric shock, unplug the charger from the power
supply before attempting to clean it. Removing the battery alone does not
reduce the risk.
o) Do not store or use the tool and battery pack in locations where the temperature
may reach or exceed 40
0
C (104
0
C) such as alongside sheds or metal structures
in the summer.
p) The charger is designed for use from a standard household electrical supply
(230V-240V). Do not attempt to connect the charger to a different supply.
q) If you wish to charge a second battery pack, unplug the charger from the mains
supply and leave it for at least 15 minutes. After this time you can charge a
second battery pack.
3) Important safety instructions for battery pack
a) The battery pack for this tool has been shipped in a low charge condition. You
should charge the battery pack fully before use.
b) To ensure the longest battery life and best battery performance, always charge
the battery when the air temperature is between 18-24
0
C (65-75
0
F). Do not
charge the battery pack when the temperature is below4
0
C(40
0
F),or above 40
0
C
(104
0
F).this is important. Failure to observe this safety rule could cause serious
damage to the battery pack.
c) Do not incinerate the battery pack even if it is seriously damaged or can no