PowerFleet LV710, Руководство по установке

Страница: 2 / 39

LV710 Freight Camera - Dry Van Swing Door Installation
Revised: 05/23/19 2
Device Activation:
1. Record 12-character device MAC address. MAC address is printed on the device label.
2. Record the asset’s unique identification number and VIN
3. Remove the tape covering the device activation magnet. Note: Do not remove clear protective film
from lens at this time.
4. Remove the activation magnet from the device. Retain the magnet.
5. Observe that the LED on the device lens flashes red three times. This confirms activation.
Device Pairing:
1. Contact I.D. Systems Customer Support.
a. Phone: 888-855-0913
b. Email: aisupport@id-systems.com
2. Provide serial number from LV300 or LV500 tracking device that has been installed on trailer. (refer
to LV300 or LV500 for specific installation instructions)
3. Provide MAC address from LV710 device.
4. Request that LV710 device be paired with installed LV300 or LV500 device.
MAC Address