Powerfix 113376, Руководство по эксплуатации

Страница: 26 / 32

23
PHG 3000 C3
GB
Heating operation
♦ Ensure that the operating switch
2
is at position 0 (off).
♦ If the appliance is being taken into service for the first time or if you want
to reset the desired temperature, turn the temperature control
3 to the
MAX position.
♦ Set the operating switch
2
to the desired operating mode.
Setting the temperature
♦ Turn the temperature regulator 3 firstly to the Max position.
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
3 anti-clockwise until a slight click sound is heard.
This means that the heating element is now switched off.
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
► The ventilator continues to run when the temperature regulator has switched
the heating element off. The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
Overheating protection
The appliance is fitted with a temperature regulator controlled overheating
protector. Should the appliance become too hot internally, the heating element
switches itself off automatically. However, the fan continues to run, so that a rapid
cooling can be achieved. Once the appliance has cooled itself down, the heat-
ing element switches back on automatically.
WARNING
As a general rule, overheating has a reason! It can mean a risk
of fire!
► Check that the appliance can sufficiently disburse the heat generated:
Is the appliance covered or is it too close to a wall or other obstacle?
Are the grilles on the front or back clear? Is the ventilator blocked?
► If possible, eliminate the problem or contact the Service Hotline
(see Chapter
Service
).
► Even if you cannot find a cause, but the overheating protection triggers
a second time, you must return the appliance to Customer Services for
inspection or repair.