8
PHG 2500 A1
GB
IE
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Operating switch
The operating switch
4
has 4 positions and switches the ventilator and the
heating levels on and off .
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
Temperature regulator
The temperature regulator
3
is steplessly adjustable.
By turning it clockwise a higher temperature is set, by
turning it anticlockwise a lower temperature will be set.
Heating operation
♦
Ensure that the operating switch
4
is at position 0 (off ).
♦
If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature control
3
to the
MAX position.
♦
Set the operating switch
4
to the desired operating mode.
Setting the temperature
♦
Turn the temperature regulator
3
fi rstly to the Max position.
♦
When the room has reached the desired temperature, slowly turn the
temperature regulator
3
anti-clockwise until a slight click sound is heard.
This means that the heating element is now switched off .
♦
The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
►
The ventilator continues to run when the temperature regulator has switched
the heating element off . The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
Buch_75914_LB6.indb 8
Buch_75914_LB6.indb 8
29.05.12 15:47
29.05.12 15:47
