Powerfix Profi PGH 17 A1, Инструкция по эксплуатации и технике безопасности, Страница: 8 / 70

8
GB
3. Layout (Fig. 1)
1 Carry handle
2 Air inlet grille
3 Gas connection thread
4 Gas valve button
5 ON/OFF switch
6 Base
7 Housing
8 Piezo ignition knob
9 Air outlet opening
4. Items supplied
■
Open the packaging and take out the
equipment with care.
■
Remove the packaging material and any
packaging and / or transportation braces (if
available).
■
Check to see if all items are present.
■
Inspect the equipment and accessories for
transport damage.
■
If possible, keep the packaging until the end
of the guarantee period.
IMPORTANT
The equipment and packaging material are
not toys! Do not let children play with
plastic bags, foils or small parts!
There is a danger of swallowing or
suffocating!
■
Gas fan heater
■
Carry handle with 2 screws
■
Gas hose (1m long)
■
Pressure regulator 300mbar
■
Original operating instructions
5. Intended use
The gas fan heater is designed solely for
heating, structural drying and thawing purposes
in well ventilated rooms and outdoors. Well
ventilated rooms have ventilation openings with
a total area of at least 450 cm². A minimum
room size of 170 m³ is compulsory. The gas fan
heater must never be used in basements or in
rooms below ground level. This gas fan heater
is not designed for household use.
The gas fan heater may be used only for its
intended purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage
or injuries of any kind which result from such
misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes.
6. Before starting the equipment
6.1. Fitting the carry handle (Fig. 1)
Use a cross-tip screwdriver and the provided
screws to screw the carry handle (1) to the
housing (7).
6.2 Connecting to the gas cylinder (Fig. 2)
6.2.1 Parts required
The following parts are required to connect
the gas fan heater to the gas cylinder:
■
A conventional 5 kg or 11 kg (max. 13 kg)
gas cylinder.
■
A pressure regulator compliant with EN
13785 for 300mbar operating pressure,
max. 1.5 kg/h, for the gas cylinder used
(supplied).
■
A sufficiently long hose line compliant with
EN 1763-1 (max. 1.0 m) which can be fitted
without kinking (supplied).
Anleitung_2330446_LB4:_ 10.06.2011 13:49 Uhr Seite 8