Powerfix Profi HG00921A, Инструкции по эксплуатации и безопасности

Страница: 22 / 69

20 GB/IE
with STF (standard tension force) may be used for friction lashing.
HG00921A:
j
Place the lashing strap around the load
j Open the ratchet handle
1
and place the slotted shaft
3
into the position so that the
webbing
4
can be inserted into it (see Fig. A III).
j Insert the webbing
4
into the slotted shaft
3
of the ratchet. Carefully pull it through
the slotted shaft
3
until the webbing
4
lies snug against the load.
j Tighten the lashing strap by moving the handle
1
of the ratchet backwards and
forwards (see Fig. A I - III). Tighten the lashing strap until you have obtained the tension
you wish to have.
note: Make sure that webbing 4 is wound at least 1.5 times to a maximum of 3
times around the slotted shaft
3
.
j
Bring the ratchet handle
1
into the basic position (see Fig. A I). The load is now
secure.
HG00921B:
j
Use the S hook to securely attach the lashing strap to the load.
j Open the ratchet handle
1
and place the slotted shaft
3
into the position so that the
webbing
4
can be inserted into it (see Fig. A III).
j Insert the webbing 4 into the slotted shaft 3 of the ratchet. Carefully pull it through
the slotted shaft
3
until the webbing
4
lies snug against the load.
j Tighten the lashing strap by moving the handle of the ratchet backwards and forwards (see
Fig. A I - III). Tighten the lashing strap until you have obtained the tension you wish to have.
note:
Make sure that webbing 4 is wound at least 1.5 times to a maximum of 3
times around the slotted shaft
3
.
j Bring the ratchet handle
1
into the basic position (see Fig. A I). The load is now secure.
HG00921C:
j
Loop the lashing strap around the load.
j Press the clamping lock
5
down and pass the webbing
6
through the clamping lock
from below (see Fig. C).
j Carefully pull the webbing
6
through the clamping lock until you get the tension you
want. Then release the clamping lock
5
.
Q
Releasing the lashing strap
CAuTIOn! Check before releasing the strap that the load is stable. Make sure that
the load is stable even without the lashing strap and that it cannot fall down.
CAuTIOn! RISK OF InJuRY! Make sure that nobody is near the load when you
release the lashing strap. Falling parts could cause injuries.
CAuTIOn! RISK OF InJuRY! When opening the lashing equipment, the preload