10 GB/IE
grinder on for a few seconds and then switch it
off again. Check again that all the screws,
bolts and fixings are firmly seated.
Operation
Place the workpiece on to the base plate
32
against the rear stop
27
and secure it with the
vice
41
.
note:
Ensure that the workpiece lies against
the base plate
32
.
CAUTIOn! DAnger OF InJUrY!
Ensure
that the length of the workpiece is at least half
the length of the stop
27
, otherwise the
workpiece may become loose and slide out.
Set the vice
41
so that the workpiece lines up
with the centre of the cutting disc.
Now switch on the angle grinder and press it
down on to the workpiece.
Avoid any backwards movement and apply
even pressure on the workpiece.
Cleaning and care
Use a slightly moist, fluff-free cloth when you
are cleaning or polishing the product.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
