Powerfist 16-Speed Floor Mount Drill Press, Руководство пользователя

Страница: 17 / 52

V4.0 16-Speed Floor Mount Drill Press 8708703
Visit www.princessauto.com for more information 17
b. Set the depth of the drill so that the drill will not come in contact with
the table – or align the table so that the hole in its center is in line with
the drill bit.
5. Switch the power ON.
6. Slowly rotate the feed wheel handles to bring the drill bit down towards the
table and into your workpiece. After drilling a hole, release the feed wheel
handles slowly to return the chuck to its original position.
7. Continue the operation until the task is completed. When completed, switch
the power OFF and wait for the drill bit to stop spinning.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
a. Check tightness of mounting bolts and head and column securing
set screws.
b. Check the drive belt for wear and replace if frayed or damaged.
c. If the electrical mains lead is damaged in any way, it should be
replaced immediately.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1. Remove all swarf from the machine with a vacuum cleaner or compressed
air. Focus on removing dust from the motor’s fan vents.
2. Thoroughly clean all surfaces