3×35W
Tip:
The charge controller and the USB port will not respond unless it is connected to a battery!
Always connect the battery first, then load (if applicable) and then the solar panel.
For lights explanation, please check the Specifications section.
What are you going to use it for
1. Charge solar generators
1.1. Charge 12V Solar Generator with built-in Charge Controller
Step 1: understand your solar generator and prepare the MC4 adapter for your solar generator
Step 2: Disconnect MC4 Connectors and let it to be a solar panel with MC4 connectors
Step 3: Use your MC4 Adapter to charge your solar generator
USA Sales: 4120 Valley Blvd, #D, Pomona, CA 91789, USA
Tel:+1-909-321 4455
Email: [email protected]
www.PowerECO.com
Power Your Green Life!
