PARTS NEEDED
7
Lift up the cab and drop the .75" mounting post upper clamps (K)
into the mounting posts (M) tighten both sides until snug.
Adjust the cab and mounting system until parts look level.
Once installed it may be necessary to adjust the cab to
make it level. Adjust the angle of the cab until you are happy
with the angle.
Tighten all bolts down.
CAUTION: No part of the fabric cab skin should touch the
engine or exhaust system of your snow thrower.
7
INSTALL ASSEMBLED CAB ON
LOWER MOUNTING POSTS
8
ADJUSTING THE
SNOW THROWER CAB ANGLE
ASSEMBLY AND INSTALLATION
TOOLS NEEDED
1/2 in. Box
Wrench
OR
OR
1/2 in. Socket
Wrench
Adjustable
Wrench
M
M
K
K
+
