6
PARTS NEEDED
Note: Exact positioning may vary depending on your machine. Note: If your machine does not have a horizontal crossbar, it may be
necessary to mount the
1" mounting post upper clamp
pieces (U) and (T) on the vertical side frame.
6
ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER
ASSEMBLY AND INSTALLATION
Attach 6/7" mounting posts (M) to the 1" mounting post upper
clamp (T).
Tighten until snug.
Repeat on opposite side with the remaining 6/7" mounting
post (M).
TOOLS NEEDED
1/2 in. Box
Wrench
OR
OR
1/2 in. Socket
Wrench
Adjustable
Wrench
Q
Attach the 1" mounting post upper clamp (T) to the mounting
post upper clamp top plate (U) on the horizontal crossbar of the
snow cab.
Install it so that it is snug but not tight.
Repeat on opposite side of the crossbar with the remaining
1" mounting post matching the angle with the previously
installed post.
T
U
U
T
T
U
T
Q
Q
U
S
S
M
T
Q
M
T
+
M
T
U
S
Q
+
(2 each)
