PowerBox Systems PowerBox Competition SRS, Инструкция по эксплуатации

Страница: 14 / 36

-14-
3.8. Output Mapping
The OUTPUT MAPPING function allows the channels to be assigned in
any sequence you like. This makes it possible to connect the servos to
the sockets which best match the wiring arrangement in your model.
The only outputs which have a fixed assignment are those for the door
sequencer. By default the outputs have a standard assignment.
Caution: Disconnect the mechanical linkages from the unmatched
servos before connecting them to the backer, noting the setup
information under Point 4.
The letters to the left of the colon (:) are the channel outputs, as printed
on the case of the
PowerBox Cockpit / Competition SRS . The
numbers to the right of the colon are the channels as they arrive from the
transmitter. The
FS or HD to the right of the numbers indicates Fail-Safe
or Hold mode. Each channel can be set up individually for the unlikely
eventuality of signal loss (when two receivers are in use).
It is now very simple to position the cursor in front of a letter, press the
SET button, and assign an input channel to the selected output using
the I and II buttons.
If you press the SET button again, you can toggle between
FS and HD
using the I and II buttons. Pressing the SET button once more stores the
assignment automatically.
It is also a very simple matter to arrange for the same input channel to
be present at multiple outputs, if you want more than one output to
generate the same function.