DISC SCRUB DECK
A
B
C
D
E
F
G
H
I
J
Housing
Access door (6)
Brush skirt
Brush motor
Mounting
bracket
Flat washer (4)
Lock washer (4)
Bolt (4)
Connector,
power
Connector,
water
SCRUB DECK INSTALLATION
When installing a cylindrical scrub deck to a machine:
Install brushes
after
the deck has been mounted to avoid flat spots on the brushes.
Use a piece of cardboard underneath the deck to prevent scratches to the painted
surface when sliding the deck under the machine.
Make sure the scrub deck is oriented correctly with the spray jets towards the front of
the machine.
When installing a disc scrub deck to a machine:
Install brushes on the scrub deck; this aids the installer in sliding the deck assembly
into position.
Make sure the scrub deck is oriented correctly with the solution hose tee fitting
towards the front of the machine.
INSTALLATION INSTRUCTIONS
Park the machine on a flat or level surface.
Remove the 2 pins that fasten the deck cover on the machine.
Turn the key switch to the ON position and select the transport mode on the
dashboard.
Slide the scrub deck assembly underneath the machine (follow instructions as
described above).
Position the scrub deck to align the mounting brackets with the mounting lugs on the
lift linkage.
Lower the lift linkage to the floor by pressing the raise/lower deck button.
Lower the lift linkage mounting lugs until they barely touch the scrub deck mounting
brackets.
11
